Fort Lauderdale · Broward County

Sewer Jetting in Fort Lauderdale, FL

Sewer jetting for main lines, laterals, shared condo and HOA mains, commercial and industrial lines, and storm sewers in Fort Lauderdale. Jetters for lines from 1 inch up to 36 inches and larger. Call (954) 914-5151.

Sewer jetting for main lines and large pipe

Sewer jetting is hydro jetting applied to the big lines: the building sewer that leaves a house, the lateral that runs to the city connection, the shared main under a condo or apartment complex, and the larger commercial, industrial, municipal, and storm pipes that carry far more flow. These lines are where a backup turns into a property-wide problem, and they are where a cable machine reaches its limits. A jetter cleans the full diameter of the pipe and flushes the debris downstream, even in pipe that is much larger than a household drain.

Sewer-Jetting.com is a family-owned, owner-operated company focused on Greater Fort Lauderdale, and sewer jetting is what the company is named for. Every call to (954) 914-5151 is answered by the owner-operator, so you can describe the line to the person who will plan the work.

Signs the main sewer line needs jetting

  • More than one fixture is slow or backing up at the same time.
  • Toilets gurgle or bubble when the washing machine or a tub drains.
  • Water comes up in a shower, tub, or floor drain on the lowest level.
  • The same main has been snaked before and closed again within weeks or months.
  • In a building, backups show up in lower units first, which points to a shared line.

If sewage is coming up now, stop running water into the affected fixtures, keep people away from it, and call. You can also read our guide to the signs your sewer line needs jetting.

Equipment sized to the pipe

We have jetters for lines from 1 inch up to 36 inches and larger pipes, running from trailer-mounted units to combination vac/jetter trucks. Small lines need control more than raw power. Big lines need water volume to move sand, sludge, and debris out of the pipe. Matching the jetter, hose, and nozzle to the line is the difference between a clean main and a stirred-up one. When debris has to come out of a structure instead of being washed downstream, vac truck services recover it.

Residential building sewers and laterals

Fort Lauderdale homes are built on slabs, and the main line usually leaves the house through a cleanout near the front or side of the house and runs to the street or alley. In the city's older neighborhoods that line may be cast iron or older lateral material that has been in sandy, wet ground for fifty years or more. We camera the main when it can be seen, then jet it with the right nozzle for roots, grease, or scale. If the camera shows a broken or badly sagging section, we will tell you that before any high-pressure work.

Shared mains for condos, apartments, and HOAs

Condo towers on the Galt Ocean Mile and the Intracoastal, garden apartments, and HOA communities west of I-95 run many units into shared mains and stacks. When those lines close, the backup lands on whoever is lowest. We work with boards and property managers to plan access to common cleanouts, jet shared mains building by building, and provide camera footage so the board can see the condition of the line. See our HOA and property manager page for how we coordinate visits.

Commercial, industrial, and municipal lines

Restaurants, hotels, marinas, office towers, plazas, and industrial sites push heavy flow through larger pipes. We jet commercial mains and grease lines, and our larger jetters handle municipal and industrial lines as well. Scheduled jetting can be set up through our maintenance programs, and visits can often be planned outside operating hours when the site allows.

Storm sewers and culverts

Fort Lauderdale's low ground, sandy soil, and tidal canals make storm drainage a serious matter. Storm sewers, culverts, and the lines between catch basins fill with sand and debris. We jet those lines and clean the structures, so rain has somewhere to go. See storm drain cleaning.

Where we provide sewer jetting

We provide sewer jetting throughout Fort Lauderdale, from downtown and the beach to the neighborhoods west of I-95, and across Greater Fort Lauderdale. For lines where the main concern is grease, roots, or scale on the pipe wall, see hydro jetting in Fort Lauderdale. For a city overview, see our Fort Lauderdale service area page.

Call (954) 914-5151 or request a free estimate for sewer jetting in Fort Lauderdale.

FAQ

Frequently asked questions

What is the difference between sewer jetting and hydro jetting?

They use the same method: high-pressure water through a hose and nozzle. "Sewer jetting" usually means jetting a main sewer line, lateral, or larger pipe, while "hydro jetting" is the general name for the method on any size of line.

What size sewer lines can you jet?

We have jetters for lines from 1 inch up to 36 inches and larger pipes. That covers residential mains, condo and commercial mains, and large storm and industrial lines.

Can you jet the shared main under our Fort Lauderdale condo building?

Yes. We work with associations and property managers to plan access to common cleanouts, jet shared mains and stacks, and provide camera footage for the board.

Do you jet storm sewers and culverts?

Yes. We jet storm sewers, culverts, and the lines between catch basins, and use vac-truck recovery when sediment has to be removed from a structure.

Do you take municipal and industrial sewer jetting work?

Yes. Municipal and industrial lines are part of our work. Call (954) 914-5151 to describe the scope, pipe sizes, and access.

Need Drain Cleaning Today?

We're Ready to Help!

(954) 914-5151

All calls answered by the owner-operator.

Call (954) 914-5151