
Camera inspection
Sewer camera inspection and pipe locating
A camera in the line to identify buildup, roots, offsets, and whether hydro jetting is appropriate — then, when possible, to show the line after the work.
See inside the line before deciding what to do
A sewer camera inspection takes the guessing out of a drain problem. A waterproof HD camera on a flexible push cable travels through the pipe from a cleanout or other access point and shows what is inside on a monitor. Locating equipment can mark the camera's position and depth on the ground, so a problem spot can be found from above.
What a camera can show
- Grease, sludge, and scale on the pipe wall
- Tree roots at joints and cracks
- Cracks, breaks, and collapsed sections
- Offset or separated joints
- Bellies (sags) where water and debris settle
- Objects stuck in the line
When to get a sewer camera inspection
- Before hydro jetting, to confirm the pipe can take pressure
- After cleaning, to verify the wall is actually clean
- When a clog keeps coming back
- Before buying or selling a property
- When a property manager or HOA board needs a record of a line's condition
- When roots or a broken pipe are suspected (root removal)
Limits of a camera
A camera shows the pipe but does not repair it. Standing water or a complete blockage can limit what the camera sees on the first pass, so sometimes the line has to be opened before it can be inspected. We explain those limits on site.
We provide sewer camera inspection for homes and commercial properties throughout Miami-Dade, Broward, and Palm Beach Counties.
FAQ
Frequently asked questions
What is a sewer camera inspection?
A sewer camera is a small waterproof camera on a flexible cable that is pushed through a drain or sewer line. The image shows buildup, roots, joints, cracks, and standing water. Locating equipment can often mark the path of the pipe on the ground. Inspections are useful before and after cleaning, for real-estate questions, and when a clog keeps coming back.
Do you inspect with a camera before jetting?
When the line is accessible and the camera can travel, a pre-job look helps confirm what is in the pipe and whether the wall can take pressurized water. After cleaning, a second look is often used so you can see whether the wall is actually clear. Standing water or limited access can delay or change that sequence; we explain those limits on site.
Will jetting fix a broken or collapsed pipe?
No. Jetting cleans. If a camera shows a break, a belly that holds water, a severe offset, or a collapse, cleaning may still help you diagnose the line, but it does not rebuild the pipe. We would rather show you that condition than pretend a cleaning is a structural repair.
How do I know if roots are in my sewer line?
Repeated backups, especially in the same stretch of a main, lush or settling spots in a yard, and gurgling drains can be clues, but a camera is how you confirm roots. We would rather show you the roots on a screen than guess from the yard. After removal, the same camera helps you see whether the pipe itself is still sound.
Do I need a camera inspection before hydro jetting?
When the line can be seen, it is the best way to confirm what is in the pipe and whether it can safely take high-pressure water. It also lets you see the result afterward.
Can a camera find where the problem is in my yard?
Yes. A locator picks up a signal from the camera head, so the spot and depth of a problem can be marked on the ground.
Need Drain Cleaning Today?
We're Ready to Help!
(954) 914-5151All calls answered by the owner-operator.
