Catch basins

Catch basin cleaning

Inlets and sumps cleaned so stormwater can enter the system instead of ponding on the pavement.

What a catch basin does and why it fills up

A catch basin is the box under a storm grate. Water falls through the grate, heavier material settles in the sump at the bottom, and the water leaves through an outlet pipe. The sump is designed to catch sand, gravel, and debris so it does not travel into the pipes. But once the sump is full, material starts covering the outlet and washing into the line, and the basin stops draining.

In South Florida, basins fill with sand, leaves, mulch, litter, and oily parking-lot sediment. A basin that is standing full of water after the rain has passed is the most obvious sign it needs cleaning.

How we clean catch basins

We have jetters for lines from 1 inch up to 36 inches and larger pipes. That includes the large outlet pipes and storm lines that connect catch basins on commercial and HOA properties.

  • Open the grate and check the depth of sediment and the condition of the structure
  • Vacuum out sediment, sludge, and debris with a vac truck so it is removed, not pushed downstream
  • Jet the outlet pipe and connecting storm lines
  • Camera the line when it can be seen, and note any broken or crushed pipe

Properties we serve

We clean catch basins for shopping centers, plazas, HOAs, condo associations, apartment communities, schools, office parks, and municipal lots throughout Miami-Dade, Broward, and Palm Beach Counties. Many commercial properties put basin cleaning on a schedule before the rainy season.

FAQ

Frequently asked questions

What is a catch basin and why does it clog?

A catch basin is a grated inlet that collects stormwater and lets sediment settle before water continues into a storm line. Leaves, sand, trash, and parking-lot grit fill the sump and can block the outlet. Cleaning the basin and the line downstream helps keep pavement, walks, and loading areas from ponding.

Can you clean storm drains and catch basins?

Yes. Storm-drain cleaning is a featured part of the work described on this site: catch basins, parking-lot drains, French drains, retention connections, culverts, and storm sewers. Sand, sediment, leaves, and debris are removed so water can move during South Florida rain. Vac-truck recovery may be used when the job requires it.

Can parking lot drains be cleaned?

Yes. Parking-lot drains and the catch basins tied to them collect sand, trash, and oily sediment. Cleaning the inlet and jetting or flushing the outlet line is a regular part of commercial storm-drain work, especially before the rainy season or after a storm has left standing water.

How do I know a catch basin needs cleaning?

Standing water over or around the grate after rain, visible sediment near the top of the basin, and water ponding in the parking lot are common signs.

Do you remove the sediment or flush it down the line?

We remove it. Vac-truck recovery takes the material out of the basin instead of pushing it further into the system.

Need Drain Cleaning Today?

We're Ready to Help!

(954) 914-5151

All calls answered by the owner-operator.

Call (954) 914-5151